"

球盟会体育网址|网站拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,球盟会体育网址|网站更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,球盟会体育网址|网站让您尽享娱乐、赛事投注等,且无后顾之忧!

              "
              您当前的位置:新闻中心 >> 行业动态
              Valve operating procedures
              发布时间:2019-12-14

              1. The handwheel and handle of manual valve are designed according to the hand force of ordinary people, considering the strength of sealing surface and necessary closing force.So you can't use a long lever or a long wrench.Do not force too much, too hard, or easy to damage the sealing surface, or break the hand wheel, handle.


              2. Open and close the valve to force stable, not impact;


              3. After the valve is fully open, the handwheel should be reversed a little to make the threads tight, so as to avoid looseness and damage;


              4. For the stem valve, remember the position of the stem when it is fully open and fully closed, avoid hitting the dead point when it is fully open, and facilitate checking whether it is normal when it is fully closed, so as to find whether there is debris embedded in the sealing surface;


              5. When the pipeline is initially opened, there are many internal dirty things, so the valve can be slightly opened, and the high speed flow of the fluid can be used to wash it away, and then gently closed (no quick closing or fierce closing to prevent debris damage to the sealing surface), then opened again, and repeated many times, rinse the debris, and then put it into normal operation;


              6. If the handwheel and handle are damaged or lost, they should be completed in time. No adjustable wrench should be used instead to avoid damage to the valve stem square and failure to open and close;


              7. During the operation, if any labor is found, the reasons should be analyzed.If the packing is too tight, can be properly relaxed, such as the valve stem askew, should be repaired.


              QQ
              0086 021-69755272
              qrCode